Anstar - Products
Founded in 2018 and based in Leeds, Anstar is a leading Speciality Chemical Distributor. Our success stems from a lean, customer-focused approach, strong technical support, and a culture of innovation.
| Product | Description | |
|---|---|---|
| CTFA | Polyester Urethane Acrylate. Uses: Graphic arts, electronics, adhesives, digital inks. Group: Monomer. CAS No. 66492-51-1. Pack Sizes: 200kg & 1000kg. Categories: Monomers. |  |
| Curcumin | Naturally derived antioxidant with anti-inflammatory and potential anti-cancer properties used in food as a preservative and flavour enhancer, in pharmaceuticals as an anti-inflammatory and in cosmetics for skin & hair care. Uses: Food, pharama, cosmetics. Group: Antioxidants. CAS No. 458-37-7. | |
| Dodecyl Gallate | Naturally derived antioxidant and preservative added to (fat-containing) food and cosmetics to inhibit growth of bacteria, yeast and fungi. Uses: Food, cosmetics. Group: Antioxidants. CAS No. 1166-52-5. | |
| Ethyl Gallate | Naturally derived antioxidant used as a food additive to prevent deterioration and spoilage and in pharma/ cosmetics industries due to its anti-inflammatory and antimicrobial abilities. Uses: Food, cosmetics, pharma, cosmetics, industrial. Group: Antioxidants. CAS No. 831-61-8. | |
| Gallic Acid (GA) | Naturally derived antioxidant used to protect fats and oils in foods from rancidity and in medicine for its health benefits, such as the ability to fight off infections and reduce inflammation. Uses: Food, animal feed, pharma, cosmetics. Group: Antioxidants. Grades: Monohydrate, Anhydrous. CAS No. 5995-86-8, 149-91-7. | |
| HDDA | Multifunctional Acrylate. Uses: Graphic arts, coatings, electronics, adhesives. Group: Monomer. CAS No. 13048-33-4. Categories: Monomers. | |
| Hesperidin | Naturally derived flavanone with antioxidant, anti-inflammatory and cholesterol-lowering properties, commonly used as dietary supplements. Uses: Dietary supplement. Group: Dietary supplements. CAS No. 520-26-3. | |
| JRCure 1109 | Phosphine Oxide. Group: Photoinitiator. CAS No. 162881-26-7. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1127 | New photoinitiator with excellent reactivity especially in comparison with conventional alpoha hydroxy ketones. Works well with Photoinitiatorgmented systems using mercury lamps and good performance with clear coatings. Suitable for all systems where low VOC, odor, migration and extraction values are needed. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 1173 | Highly versatile, liquid photoinitiator that provides low yellowing and good surface cure when used at 0.5-5 wt% in UV curable formulations. 1173 shows similar reactivity to 184 and both are widely used in high quality coatings and varnishes. 1173 can be combined with other photoinitiators in thick films to overcome oxygen inhibition. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 7473-98-5. Pack Sizes: 25kg & 1000kg. Categories: Photoinitiators. | |
| JRCure 1508 | 1508 is a polymeric thioxanthone initiator with a molecular weight over 1000 so ideal for low migration inks and coatings. It can be used alongside polymeric amines, polymeric α-amino ketones, and phosphine oxide initiators such as 1819. An ideal replacement to ITX as it has a similar reactivity without any classification concerns. Uses: Graphic arts, coatings, digital inks. Group: Photoinitiator. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1509 | 1509 is a polymeric thioxanthone initiator with molecular weight over 1,100 so ideal for low migration inks and coatings. 1509 is designed as a companion product to 1508 to improve stability, but it can also be used by itself for even greater compatibility. It can be used alongside polymeric amines, polymeric α-amino ketones, and phosphine oxide initiators such as 1819. 1509 is similar in structure and CAS number to 1508, but differs in the molecular weight distribution. Uses: Graphic arts, coatings, digital inks. Group: Photoinitiator. Pack Sizes: 25kg. Categories: Photoinitiators. | |
| JRCure 1510 | A new cost-effective polymeric benzophenone for food contact applications, ideal for low migration inks and coatings. Designed for curing using mercury lamps and can be used alongside polymeric amines such as A151 to improve surface cure and polymeric α-amino ketones such as JRCure 1521 to improve cure response. Uses: Graphic arts, coatings, digital inks. Group: Photoinitiator. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1515 | A new premium polymeric benzophenone for food contact applications. Exhibits higher curing and lower viscosity and yellowing vs. 1510. Designed for curing using mercury lamps and can be used alongside polymeric amines such as A151 to improve surface cure and polymeric α-amino ketones such as JRCure 1521 to improve cure response. Uses: Graphic arts, coatings, digital inks. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 1521 | New macromolecule photoinitiator with low migration and low yellowing. Can be used as an alternative to 907 or 379 and in conjunction with 1508/1509 for LED curing. Uses: Graphic arts, coatings, electronics, digital inks. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 1531 | A new photoinitiator with extremely low yellowing and exceptional reaction speed. Though not required to react, 1531 synergises well with P102 to increase reactivity while substanitally decreasing yellowing. Ideally suited to varnishes where extremely low yellowing is required such as wood coatings and fibre optic cables. Uses: Graphic arts, coatings, adhesives. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 1607 | New Type I photoinitiator that provides low odour, high activity and improved solubility in monomers and oligomers when used at 2-6 wt% in UV curable formulations. Synergises strongly with phosphine oxides and thioxanthones to provide superior reactivity at LED wavelengths. 1607 can be mixed with 184 and ITX for gloss finish. Uses: Graphic arts, coatings, electronics, adhesives, 3d printing, digital inks. Group: Photoinitiator. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1819 | Versatile photoinitiator for radical polymerisation of unsaturated resins upon UV and near visible light exposure. Good performance of curing Photoinitiatorgmented formulations and in outdoor applications. it can be formulated with UV absorbers to gain good weather stability, while without harming the cure speed. Good through curing of thick coating film. Gives a clean white appearance in contrast to the off-white colour associated with other long wavelength absorption photoinitiators. Uses: Graphic arts, coatings, electronics, adhesives, 3d printing, digital inks. Group: Photoinitiator. CAS No. 162881-26-7. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1819DW | Disperses in water for UV curing of water based emulsions for food packaging and LED curing. Uses: Coatings. Group: Photoinitiator. CAS No. 162881-26-7. Categories: Photoinitiators. | |
| JRCure 184 | Highly versatile, solid photoinitiator that has good solubility in UV monomers. It provides low yellowing and good surface cure when used at 0.5-5 wt% in UV curable formulations. 184 shows similar reactivity to 1173 and both are widely used in high quality coatings and varnishes. 184 can be combined with other photoinitiators in thick films to overcome oxygen inhibition. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 947-19-3. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 1919 | A new future proof TPO replacement with extremely low yellowing and high reactivity. Suitable for UV ink, fibre optic coatings, 3D printing, adhesives etc. 3-6% in ink formulations and 2-4% in varnish formulations. Uses: Graphic arts, coatings, electronics, adhesives, 3d printing, digital inks. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 2818 | A liquid photoinitiator with good compatibility with silicon-containing acrylate or vinyl ether, fast curing speed, low ordour and yellowing. Uses: Graphic arts, coatings. Group: Photoinitiator. Categories: Photoinitiators. | |
| JRCure 2959 | A water dispersible photoinitiator that offers low yellowing, low odour, low volatility and good surface cure when used at 0.5-5 wt% in UV curable formulations. Water solubility of around 2% makes this photoinitiator more ideally suited for water-based UV formulations, such as aqueous polyurethane dispersions. 2959 is also FDA approved for biomedical applications. Uses: Graphic arts, coatings, adhesives, digital inks. Group: Photoinitiator. CAS No. 106797-53-9. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 369 | Extremely reactive photoinitiator which has almost identical photochemical properties and reactivity to 379. 369 is easily sensitized in the long wave UV by small amounts of thioxanthone. This sensitisation effect increases its reactivity significantly and leads to very high cure speeds that can be utilised in high-speed offset litho and flexo inks. Uses: Coatings, electronics. Group: Photoinitiator. CAS No. 119313-12-1. Categories: Photoinitiators. | |
| JRCure 379 | Extremely reactive photoinitiator which has almost identical photochemical properties and reactivity to 369. 379 is more soluble that 369 and is described as a low-emission amino ketone (LE-AK). 379 is easily sensitised in the long wave UV by small amounts of thioxanthone. This sensitisation effect increases its reactivity significantly and leads to very high cure speeds that can be utilised in high-speed offset litho and flexo inks. Uses: Graphic arts, coatings, electronics, digital inks. Group: Photoinitiator. CAS No. 119344-86-4. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure 4976 | A clear yellow/amber liquid that is used as a cationic photoinitiator in UV, LED, and EB curing application. Uses: Graphic arts, coatings, 3d printing. Group: Photoinitiator. CAS No. 104558-95-4. Categories: Photoinitiators. | |
| JRCure 4992 | A clear yellow/amber liquid that is used as a cationic photoinitiator in UV, LED, and EB curing applications. Uses: Graphic arts, coatings, 3d printing. Group: Photoinitiator. CAS No. 159120-95-3 & 108-32-7. Categories: Photoinitiators. | |
| JRCure 784 | Extremely reactive photoinitiator that reacts to visible light. 784 exhibits photobleaching properties and can be used to produce very thick coatings. 784 is mainly used in high resolution micro electronics and polyamide formulations. Uses: Electronics, 3d printing. Group: Photoinitiator. CAS No. 125051-32-3. Pack Sizes: 15kg. Categories: Photoinitiators. | |
| JRCure 907 | Very efficient, fast curing photoinitiator which is especially good for curing cyan inks. 907 exhibits low yellowing which means it can be used in screen inks and white lacquers as well as its main application, resist inks. 907 is easily sensitised by small amounts (0.2-0.5%) of thioxanthones which significantly increase cure speed (e.g. adding 0.5% ITX to 2% 907 will more than double the cure speed). Uses: Electronics, adhesives. Group: Photoinitiator. CAS No. 71868-10-5. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure A161 | High molecular weight polymeric amine synergist designed as a food-contact-safe alternative to EDB and EHA in Type II initiator systems. Molecular weight of over 1,000 and is difunctional. Remarkably low viscosity and yellowing. Synergises well and improves solubility of 1508 to provide a low migration LED-cured formulation. Uses: Graphic arts, coatings. Group: Amine synergist. Pack Sizes: 25kg. Categories: Amine Synergists. | |
| JRCure BDK | Good general-purpose photoinitiator that gives high reactivity and produces good hardness and gloss. BDK has a high thermal stability which gives excellent formulation stability. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 24650-42-8. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure BP | Cost effective photoinitiator which has a good surface cure. BP has a low melting point and is able to form liquid eutectic pairs with many other photoinitiators. Uses: Coatings, electronics, adhesives. Group: Photoinitiator. CAS No. 119-61-9. Pack Sizes: 25kg. Categories: Photoinitiators. | |
| JRCure DETX | Thioxanthone photoinitiator that is used widely to sensitise other photoinitiators when used at 0.2-0.5 wt% in UV/LED curable formulation. DETX absorbs at 395 nm which makes it compatible in LED applications. ITX and DETX exhibit similar reactivity and are used almost universally in ink formulations. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 82799-44-8. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure EDB | Highly efficient solid amine synergist that is used in conjunction with Type II photoinitiators. High reactivity and excellent ability to prevent oxygen inhibition. Does not affect water balance in Litho applications. Uses: Graphic arts, coatings, digital inks. Group: Amine synergist. CAS No. 10287-53-3. Categories: Amine Synergists. | |
| JRCure EHA | Highly effective liquid amine synergist that can be used in conjunction with Type II photoinitiators. High reactivity and excellent ability to prevent oxygen inhibition. Does not affect water balance in Litho applications. Uses: Graphic arts, coatings, digital inks. Group: Amine synergist. CAS No. 21245-02-3. Categories: Amine Synergists. | |
| JRCure EMK | Efficient photoinitiator that can be used as a photosensitiser and an amine synergist when used at 0.1-4 wt% in UV curable formulations. EMK shows strong absorption between 350-400 nm which makes it most suitable for Photoinitiatorgmented and black UV/LED coatings. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 90-93-7. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure ITX | Thioxanthone photoinitiator that is used widely to sensitise other photoinitiators when used at 0.2-0.5 wt% in UV/LED curable formulation. ITX absorbs long wave UV which leads to good through cure, good adhesion and makes it compatible in LED applications. ITX and DETX exhibit similar reactivity and are used almost universally in ink formulations. Uses: Graphic arts, coatings, electronics, adhesives, digital inks. Group: Photoinitiator. CAS No. 5495-84-1. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure MBF | Highly efficient, non-yellowing liquid photoinitiator. MBF forms a biradical when exposed to UV light which is an efficient oxygen scavenger and so reduces the effects of oxygen inhibition. MBF also responds well to urethane acrylates without addition of an amine to produce very hard, clear coatings. Uses: Graphic arts, coatings, adhesives. Group: Photoinitiator. CAS No. 15206-55-0. Pack Sizes: 25kg. Categories: Photoinitiators. | |
| JRCure MBZ | Photoinitiator which shows similar reactivity to BP but is less volatile and less odorous. Uses: Graphic arts, coatings, electronics, adhesives. Group: Photoinitiator. CAS No. 134-84-9. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure OMBB | Highly efficient solid photoinitiator with extremely low odour as well as good surface and depth cure when used at 2-5 wt% in UV curable formulations. OMBB is Nestle compliant and so widely used in food packaging UV ink and varnish. Uses: Graphic arts, coatings, adhesives. Group: Photoinitiator. CAS No. 606-28-0. Categories: Photoinitiators. | |
| JRCure P102 | High reactivity and low yellowing dimeric acrylated amine. Has low viscosity and is less prone to nucleophilic attack making it compatible with phosphine oxides and benzyl formate type photoinitiators. Uses: 3d printing, graphic arts, coatings, digital inks. Group: Amine synergist. Pack Sizes: 25kg. Categories: Amine Synergists. | |
| JRCure TPO | Photobleaching photoinitiator that offers good shelf stability, fast cure, good through cure and low yellowing. Phosphine oxides, such as TPO, are used in thick film applications. TPO also provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. Uses: Coatings, electronics, adhesives, 3d printing. Group: Photoinitiator. CAS No. 75980-60-8. Pack Sizes: 20kg. Categories: Photoinitiators. | |
| JRCure TPO-L | Photobleaching, liquid photoinitiator that offers low yellowing, low volatility and low odour. Being a liquid, TPO-L is easily incorporated into a formulation and can aid the solubility of other photoinitiators, providing good miscibility. TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. Uses: Graphic arts, coatings, electronics, adhesives, 3d printing, digital inks. Group: Photoinitiator. CAS No. 84434-11-7. Pack Sizes: 25kg & 200kg. Categories: Photoinitiators. | |
| Methyl 3,4,5 - Trimethoxy Benzoate | Methyl 3,4,5 - Trimethoxy Benzoate. Uses: Pharma. Group: Active pharma intermediates. CAS No. 1916-07-0. Categories: API intermediates. | |
| Methyl Gallate | Naturally derived antioxidant used in pharmacological applications due to its ability to protect cells from damage caused by oxidative stress and other abilities such as being anti-tumor, anti-inflammatory and anti-microbial. Uses: Pharma. Group: Antioxidants. CAS No. 99-24-1. | |
| Monk Fruit Extract | Natural sweetener that is 250-500 times sweeter than sugar, making it a popular choice to manage diebetes, weight loss and improve heart health and inflammation. Uses: Food, pharma. Group: High-intensity sweetener. Grades: Mogrosides 25%, 50%. CAS No. 88901-36-4. Categories: high intensity sweeteners. | |
| Naringin | Naturally derived flavanone with antioxidant, anti-inflammatory and cholesterol-lowering properties, commonly used as dietary supplements. Uses: Dietary supplement. Group: Dietary supplements. CAS No. 10236-47-2. | |
| N-Carbamyl-L-Glutamic Acid (NCG) | Nutritional booster that has been shown to significantly increase muscle production and is used in many popular bodybuilding muscle growth products. Uses: Dietary supplement. Group: Dietary supplements. CAS No. 1188-38-1. | |
| Neotame | Natural sweetener that is 6,000-8,000 times sweeter than sugar (and 30-60 times sweeter than Aspartame), making it a popular choice in various foods and beverages. Uses: Food. Group: High-intensity sweetener. CAS No. 165450-17-9. Categories: high intensity sweeteners. | |
| Octyl Gallate | Naturally derived antioxidant used as a thickener or emulsifier in processed foods. Also has antibacterial properties and is used in soaps, shampoos, skin lotions etc. Uses: Food, pharma, cosmetics. Group: Antioxidants. CAS No. 1034-01-1. | |
| Propyl Gallate (PG) | Naturally derived antioxidant used to protect fats and oils in foods from rancidity and as a stabiliser in pharmaceuticals and cosmetics to prevent oxidative degradation of lipids. Uses: Food, animal feed, pharma, cosmetics. Group: Antioxidants. Grades: BP & EP, E310, FCC, USP. CAS No. 121-79-9. | |
| Pyrogallol | Naturally derived compound used hisorically as a developing agent for black-and-white pictures. Commonly used now for oxygen absorption in gas analysis and for its antiseptic properties. Uses: Industrial, antiseptic. Group: Antioxidants. CAS No. 87-66-1. | |
| Resveratrol | Naturally derived stilbenoid with antioxidant and anti-inflammatory properties commonly used as dietary supplements due to its potential health benefits in cardiovascular health, neuroprotection and cancer prevention. Uses: Dietary supplement. Group: Dietary supplements. CAS No. 501-36-0. | |
| Rosemary Extract | Naturally derived antioxidant with anti-inflammatory and anti-microbial properties used in food as a preservative, flavour enhancer and colouring agent, in cleaning products, pharmaceuticals and cosmetics. Uses: Food, animal feed, pharma, cosmetics, industrial. Group: Antioxidants. Grades: Powder, Liquid. CAS No. 84604-14-8. | |
| Rutin | Naturally derived antioxidant with anti-inflammatory properties commonly used as dietary supplements. Uses: Dietary supplement. Group: Dietary supplements. CAS No. 153-18-4. | |
| Stearyl Gallate | Naturally derived with antioxidant and antiviral properties. Uses: Food, pharma. Group: Antioxidants. CAS No. 10361-12-3. | |
| Tannic Acid (TA) | Naturally derived polyphenolic compound used as an antioxidant and preservative in food and feed. Effective in improving digestion and nutrient absorption and preventing spoilage. Can also be used in tanning leather, where it helps treat animal hides, making them less water-soluble and more durable. Uses: Food, animal feed, pharma, cosmetics, industrial. Group: Antioxidants. Grades: Feed, Food. CAS No. 1401-55-4. | |
| Tara Gum | Food additive derived from the seeds of the Caesalpinia spinosa plant used for its stabilising, thickening and gelling properties. Commonly used in various food and beverage products to enhance texture and consistency. Uses: Food. Group: Thickener/ stabiliser. CAS No. 39300-88-4. Categories: Thickeners/ Stabilisers. | |
| Tetrahydrocurcumin | Naturally derived antioxidant that is more bioavailable and stable compared to curcumin. Has potent anti-inflammatory properties and is used across pharmaceuticals and cosmetics in creams, lotions, skincare products etc. Also used as a dietary supplement due to its antioxidant, anti-tumor and anti-atherogenic effects. Uses: Pharma, cosmetics, supplement. Group: Antioxidants. CAS No. 36062-04-1. | |
| VEEA | Monomer. Uses: Graphic arts, electronics, 3d printing, digital inks. Group: Monomer. CAS No. 86273-46-3. Pack Sizes: 200kg. Categories: Monomers. | |
| XDT-1018 | A dendritic acrylate with an average functionality of 18. The hyper-branched structure of XDT-1018 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance. XDT-1018 is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesnt decompose until 373°C. Has been INCI registered for use in cosmetic applications. Uses: Graphic arts, coatings, electronics, digital inks. Group: Oligomer. Oligomer Functionality: 18. Viscosity [CP]: 57,000 (Neat). Durometer Hardness: 84D. Tensile Strength [MPa]: 28. Elongation at Break [%]: 6.7. Elegonation with %: 6.7%. Categories: Oligomers. | |
| XR-145S | Low color/non-yellowing; enhances impact resistance. low viscosity. Uses: Coatings, adhesives, 3d printing. Group: Oligomer. Oligomer Functionality: 3. Viscosity [CP]: 67,000 (Neat). Durometer Hardness: 43D. Tensile Strength [MPa]: 19. Elongation at Break [%]: 140. Elegonation with %: 140%. Categories: Oligomers. | |
| XR-741MS | Forms a clear, non-yellowing protective coating; low skin irritation; superior hardness; chemical resistance. Uses: Coatings, adhesives, 3d printing. Group: Oligomer. Oligomer Functionality: 2. Viscosity [CP]: 52,000 (Neat). Durometer Hardness: 89D. Tensile Strength [MPa]: 56. Elongation at Break [%]: 4.5. Elegonation with %: 4.5%. Categories: Oligomers. | |
| XR-9416 | Superior chemical & stain resistance; low viscosity; clear films with hydrophilic nature which result in antifogging properties; non-yellowing. Uses: Coatings, adhesives, 3d printing. Group: Oligomer. Oligomer Functionality: 3. Viscosity [CP]: 5,000 (Neat). Durometer Hardness: 84D. Tensile Strength [MPa]: 24. Elongation at Break [%]: 2. Elegonation with %: 2%. Categories: Oligomers. | |
Would you like to list your products on UK Chemical Suppliers?
Our database is helping our users find suppliers everyday.